The Savior 250 psi On-Board Tire Compressor
|
After 5 years of research and development. We tried and tested different motors and seals, valves and heads. We finally made a compressor to comply to all six of the criteria I mentioned earlier and more.
This is what we had to do in order to make a great compressor that really works 1) To equip it with a Powerful 12 volt motor with the torque necessary to get 50 psi in no time and not drain the battery. No need to start the engine to charge the battery. 2) Good quality piston seals to last over 500 hours of continue use over 20 years of normal motorcycle use. 3) Cooling fins on the cylinder head to keep the cylinder cool. 4) Good quality valves to keep air from bleeding from the tire dose giving it a precise air measurement for checking tire pressure . 5) Good quality rubber hose. Will not get hard in cold weather and crack in the sun. 6) Pressure relief vale for safety set at 60 psi. 7) We designed the mounting bracket with no sharp bends. This will improve the life and will help resist cracking with the vibration. After extensive testing we decided to offer a life time unconditional warranty on the bracket. 8) All the compressors must reach 200 psi or more in test before final assembly and packaging to assure quality performance & workmen ship. We are developing two more compressor models
1) a hand held 
Below are just a few of the features of the Savior 250PSI: With the Savior 250PSI; you will be able to keep your tires inflated at the proper pressure. You can also use the Savior 250PSI to keep your air shocks at the proper pressure as well. When you connect the air hose provided, it will not bleed the tire and will provide you the current pressure of your tires or shocks. In the case of a flat tire, a quick patch job and reinflation of the tire using the Savior 250 PSI and you will be on your way again. This revolutionary design uses custom made brackets and components to ensure a truly custom fit. |